123

123
显示标签为“Hydraulic ferrules”的博文。显示所有博文
显示标签为“Hydraulic ferrules”的博文。显示所有博文

2014年10月16日星期四

Hydraulic ferrules cold deformation, flaring, flattening no cracks

Hydraulic ferrules is one of the three parts of the card sets of pipe joints (ferrules, nuts, seamless steel pipe) composed. Hydraulic ferrules working principle is the seamless steel insert card kit, ferrule nut using inconsistent card sets, card kit seamless steel blade evenly cut, form an effective seal. Hydraulic ferrules type straight pipe hydraulic flanges  are widely used in oil refining, chemical, oil, gas, food, pharmaceutical, and other instruments. Hydraulic ferrules high accuracy, good finish, inside and outside the walls of the heat pipe no oxide layer, the hydraulic hose assembly wall of cleanliness is good, pipe withstand high pressure. Hydraulic ferrules cold deformation, flaring, flattening no cracks, deformation and can make a variety of complex mechanical processing. Hydraulic ferrules joints inside and outside the installation need to take over the interface and connection fittings are handling clean. Be sure to take over the mouth of the polished smooth surface can not have glitches and uneven surfaces.

2014年9月29日星期一

Hydraulic ferrules installation

Hydraulic ferrules card sets is one of the three parts of the card sets of pipe joints (ferrules, nuts, seamless steel pipe) composed. Working principle is the seamless steel pipe inserted into the card kit, ferrule nut using inconsistent card sets, card kit seamless steel blade evenly cut, form an effective seal. Card sets straight pipe fittings are widely used in oil refining, chemical, oil, gas, food, pharmaceutical, and other instruments. Main features: high accuracy, good finish, inside and outside the walls of the heat pipe no oxide layer, the inner wall of cleanliness is good, pipe withstand high pressure, cold deformation, flaring, flattening no cracks, deformation and can hydraulic fitting manufacturers  a variety of complex machining process . Pipe color: light gray with white sleeve type connector installation methods: Saw a suitable length of seamless steel pipe, removing burrs at the port. Perpendicular to the axis of the pipe end, angle tolerance is not greater than Hydraulic  ferrules . If you need to bend the tube, from the end face of the tube to bend parts of the line segment length can not be less than three times the length of the nut. The nut and condoms on the seamless steel tubes. Note the direction of the nut and ferrules, not installed backwards. In the pre-assembled connector body Lubricate threads and put the card, insert the tube fitting body (tube must be inserted in the end) Tighten the nuts by hand. Fittings installation instructions: When installing fittings need to take over the interface with internal and external fittings are connected to handle clean, take over the mouth must be polished smooth surface can not have glitches and uneven surfaces. And take over the site and fittings embedded bending phenomenon should not have, or will cause the connection fittings and steel pipe leakage phenomenon. Pipe fittings at both ends of the connection tube best uniform material, which can effectively prevent leakage.

2014年9月23日星期二

hydraulic ferrules installation

  Hydraulic ferrules Installation: Saw a suitable length of seamless steel pipe, removing burrs at the port. Tube end to the vertical axis. If you need to bend the tube, from the end face of the tube to bend parts of the line segment length can not be less than three times the length of the nut. The nut and condoms on the seamless steel tubes. Note the direction of the nut and ferrules, not installed backwards. In the pre-assembled connector body Lubricate threads and put the card, insert the tube Hydraulic  ferrules  body (tube must be inserted in the end) Tighten the nuts by hand. Tighten the nuts until the card sets stuck pipe, this turning point tightening torque can be increased by feel (pressure points). After reaching pressure points, and then metric hydraulic fittings the compression nut half circle. The pre-assembled connector body removed, embedded Check card sets blade edges, protrusions visible ferrule end face must be filled with spaces. Card sets can be slightly rotated, but not axial passage. Final installation, thread coated with oil in the joint body will actually install, co-ordinated with the compression nut screwed to increase the perceived tightening force so far. Then tighten laps installed.

2014年9月11日星期四

Hydraulic ferrules installation methods and working principle

  Hydraulic ferrules Installation: Saw a suitable length of seamless steel tubes, removing burrs at the port. Tube end to the vertical axis. If you need to bend the tube, from the end face of the tube to bend parts of the line segment length can not be less than three times the length of the nut. The nut and condoms on the seamless steel tubes. Note the direction of the nut and Hydraulic  ferrules, not installed backwards. Hydraulic ferrules are card sets of pipe fittings including ferrules, nuts, one consisting of three parts of seamless steel tubes. Working principle is the seamless steel pipe inserted into the card kit, ferrule nut using inconsistent card sets, card kit seamless steel blade evenly cut, form an effective seal. Card sets straight pipe hydraulic hose fittings are widely used in oil refining, chemical, oil, gas, food, pharmaceutical, and other instruments. Hydraulic ferrules main features: high accuracy, good finish, inside and outside the walls of the heat pipe no oxide layer, the inner wall of cleanliness is good, pipe withstand high pressure, cold deformation, flaring, flattening no cracks, deformation and can make a variety of complex machinery processing. Pipe color: light gray with white.

2014年9月8日星期一

hydraulic ferrules instructions and working principles

hydraulic ferrules installation instructions: When installing hydraulic ferrules need to take over the interface with internal and external hydraulic ferrules are connected to handle clean, take over the mouth must be polished smooth surface can not have glitches and uneven surfaces. And take over the site and hydraulic ferrules embedded bending phenomenon should not have, or will cause the connection hydraulic ferrules and steel pipe leakage phenomenon. Pipe hydraulic fittings at both ends of the connection tube best uniform material, which can effectively prevent leakage. After embedding steel hydraulic ferrules body began efforts to tighten Hydraulic  ferrules efforts should not be too large, should be gradual stop screwing the threaded sleeve or two-thirds of the tail, there is a wrench in the card sleeve fastening click. How it works: works by seamless steel insert card kit, using the card sleeve nut contradict card sets, card kit seamless steel blade evenly cut, form an effective seal.

2013年12月16日星期一

The use of high-pressure hose size

When the high-pressure hose be withheld , will always produce withhold too tight or too loose phenomenon, and these phenomena often lead to adverse effects of high pressure hose . Today we say it is the size of the amount withheld would it have any effect on the high-pressure hydraulic hose assemblys . We carried out by the following detailed understanding .Withhold the amount and rate of withholding high pressure hose and fittings assembly when the improper or joint structure and material , size selection is unreasonable, can lead to high pressure hydraulic hose fitting and fittings withholding too tight or too loose will cause early damage to the joints .
When assembled , if the withholding amount is too small, that is between the high pressure hose connector and cut through the loose , high pressure hose there may emerge in the role of oil in the early use from the joint ; If withholding is too large, then the connector and hydraulic hose fittings too tight , easily lead to hose inner being localized damage, cracks , directly into the high-pressure oil from the ruptured steel layer , and then he went to the wire along the gap between the spray coat tails , or has fled somewhere along the wire layer build up , so that the outer layer of plastic to produce drum kits and even rupture . Hoses and connectors in the assembly, if the withholding too fast, likely to cause damage to the plastic layer and the wire break, so that premature failure of the hose in use .
The above information is very detailed description of the effect of the size of the amount withheld for the use of high-pressure hose produced , so we need considerable attention when using this withholding his dosage size is accurate, whether the mutation will produce high pressure hose , etc. problems should close attention.

2013年12月8日星期日

The role of the metal hose

Metal hose used for automated meter signal wire protection tube and instrument meter circuit protection tube for protection, the protection of precision optical ruler, protecting the sensor lines threading stainless steel metal hydraulic adapter, metal hose electrical protection; stainless hydraulic hoses, softness is good, dustproof, waterproof, anti-oil, anti-rust; anti-wear, and provide some shielding effect. Sensing for precision optical ruler of circuit protection, industrial sensor circuit protection. Has good flexibility, corrosion resistance, high temperature resistance, wear resistance, tensile strength.

2013年12月5日星期四

By utilizing high pressure hose and connector assembly and pressing speed selection

By utilizing high pressure hose and connector assembly and pressing speed selection, or joint structure and material, size selection is not reasonable, can lead to high pressure hose and fittings withhold too tight or too loose, can cause joint damage early.The assembly, if the withholding amount is too small, the joint and the high pressure hose pressure too loose, under the action of oil pressure hose at the initial stage of use is likely to emerge from hose fittingthe joint; if the withholding amount is too large, joint and hose pressure too tight, easily lead to hose inner layer by local damage, crack, high pressure oil from the ruptured directly into the wire layer, then along the rear of the jet slot channeling to coat steel wires, or has been along the wire layer channeling somewhere accumulates, the outer layer of hydraulic tube fittingsdrum kits and even cracking. Hose and connector in the assembly, if press speed too fast, easy to cause damage and fracture of the glue in the wire layer, so that the hose damage early in use.
The above information is very detailed description of the effect of the size of the withholding amount produced using high-pressure hose, so we use the press to considerable attention, he dose size is accurate, if the high pressure hose mutate and so on should pay close attention.

2013年11月27日星期三

By utilizing high pressure hose and connector assembly and pressing speed selection

By utilizing high pressure hose and connector assembly and pressing speed selection, or joint structure and material, size selection is not reasonable, can lead to high pressure hose and fittings withhold too tight or too loose, can cause joint damage early.The assembly, if the withholding amount is too small, the joint and the high pressure hose pressure too loose, under the action of oil pressure hose at the initial stage of use is likely to emerge from hose fittingthe joint; if the withholding amount is too large, joint and hose pressure too tight, easily lead to hose inner layer by local damage, crack, high pressure oil from the ruptured directly into the wire layer, then along the rear of the jet slot channeling to coat steel wires, or has been along the wire layer channeling somewhere accumulates, the outer layer of hydraulic tube fittingsdrum kits and even cracking. Hose and connector in the assembly, if press speed too fast, easy to cause damage and fracture of the glue in the wire layer, so that the hose damage early in use.
The above information is very detailed description of the effect of the size of the withholding amount produced using high-pressure hose, so we use the press to considerable attention, he dose size is accurate, if the high pressure hose mutate and so on should pay close attention.

By utilizing high pressure hose and connector assembly and pressing speed selection

By utilizing high pressure hose and connector assembly and pressing speed selection, or joint structure and material, size selection is not reasonable, can lead to high pressure hose and fittings withhold too tight or too loose, can cause joint damage early.The assembly, if the withholding amount is too small, the joint and the high pressure hose pressure too loose, under the action of oil pressure hose at the initial stage of use is likely to emerge from hose fittingthe joint; if the withholding amount is too large, joint and hose pressure too tight, easily lead to hose inner layer by local damage, crack, high pressure oil from the ruptured directly into the wire layer, then along the rear of the jet slot channeling to coat steel wires, or has been along the wire layer channeling somewhere accumulates, the outer layer of hydraulic tube fittingsdrum kits and even cracking. Hose and connector in the assembly, if press speed too fast, easy to cause damage and fracture of the glue in the wire layer, so that the hose damage early in use.
The above information is very detailed description of the effect of the size of the withholding amount produced using high-pressure hose, so we use the press to considerable attention, he dose size is accurate, if the high pressure hose mutate and so on should pay close attention.

By utilizing high pressure hose and connector assembly and pressing speed selection

By utilizing high pressure hose and connector assembly and pressing speed selection, or joint structure and material, size selection is not reasonable, can lead to high pressure hose and fittings withhold too tight or too loose, can cause joint damage early.The assembly, if the withholding amount is too small, the joint and the high pressure hose pressure too loose, under the action of oil pressure hose at the initial stage of use is likely to emerge from hose fittingthe joint; if the withholding amount is too large, joint and hose pressure too tight, easily lead to hose inner layer by local damage, crack, high pressure oil from the ruptured directly into the wire layer, then along the rear of the jet slot channeling to coat steel wires, or has been along the wire layer channeling somewhere accumulates, the outer layer of hydraulic tube fittingsdrum kits and even cracking. Hose and connector in the assembly, if press speed too fast, easy to cause damage and fracture of the glue in the wire layer, so that the hose damage early in use.
The above information is very detailed description of the effect of the size of the withholding amount produced using high-pressure hose, so we use the press to considerable attention, he dose size is accurate, if the high pressure hose mutate and so on should pay close attention.

By utilizing high pressure hose and connector assembly and pressing speed selection

By utilizing high pressure hose and connector assembly and pressing speed selection, or joint structure and material, size selection is not reasonable, can lead to high pressure hose and fittings withhold too tight or too loose, can cause joint damage early.The assembly, if the withholding amount is too small, the joint and the high pressure hose pressure too loose, under the action of oil pressure hose at the initial stage of use is likely to emerge from hose fittingthe joint; if the withholding amount is too large, joint and hose pressure too tight, easily lead to hose inner layer by local damage, crack, high pressure oil from the ruptured directly into the wire layer, then along the rear of the jet slot channeling to coat steel wires, or has been along the wire layer channeling somewhere accumulates, the outer layer of hydraulic tube fittingsdrum kits and even cracking. Hose and connector in the assembly, if press speed too fast, easy to cause damage and fracture of the glue in the wire layer, so that the hose damage early in use.
The above information is very detailed description of the effect of the size of the withholding amount produced using high-pressure hose, so we use the press to considerable attention, he dose size is accurate, if the high pressure hose mutate and so on should pay close attention.

By utilizing high pressure hose and connector assembly and pressing speed selection

By utilizing high pressure hose and connector assembly and pressing speed selection, or joint structure and material, size selection is not reasonable, can lead to high pressure hose and fittings withhold too tight or too loose, can cause joint damage early.The assembly, if the withholding amount is too small, the joint and the high pressure hose pressure too loose, under the action of oil pressure hose at the initial stage of use is likely to emerge from hose fittingthe joint; if the withholding amount is too large, joint and hose pressure too tight, easily lead to hose inner layer by local damage, crack, high pressure oil from the ruptured directly into the wire layer, then along the rear of the jet slot channeling to coat steel wires, or has been along the wire layer channeling somewhere accumulates, the outer layer of hydraulic tube fittingsdrum kits and even cracking. Hose and connector in the assembly, if press speed too fast, easy to cause damage and fracture of the glue in the wire layer, so that the hose damage early in use.
The above information is very detailed description of the effect of the size of the withholding amount produced using high-pressure hose, so we use the press to considerable attention, he dose size is accurate, if the high pressure hose mutate and so on should pay close attention.

By utilizing high pressure hose and connector assembly and pressing speed selection

By utilizing high pressure hose and connector assembly and pressing speed selection, or joint structure and material, size selection is not reasonable, can lead to high pressure hose and fittings withhold too tight or too loose, can cause joint damage early.The assembly, if the withholding amount is too small, the joint and the high pressure hose pressure too loose, under the action of oil pressure hose at the initial stage of use is likely to emerge from hose fittingthe joint; if the withholding amount is too large, joint and hose pressure too tight, easily lead to hose inner layer by local damage, crack, high pressure oil from the ruptured directly into the wire layer, then along the rear of the jet slot channeling to coat steel wires, or has been along the wire layer channeling somewhere accumulates, the outer layer of hydraulic tube fittingsdrum kits and even cracking. Hose and connector in the assembly, if press speed too fast, easy to cause damage and fracture of the glue in the wire layer, so that the hose damage early in use.
The above information is very detailed description of the effect of the size of the withholding amount produced using high-pressure hose, so we use the press to considerable attention, he dose size is accurate, if the high pressure hose mutate and so on should pay close attention.

2013年11月21日星期四

Copper brazed directly Problems

Direct Copper brazing mainly two: the need to use corrosive aluminum brazing agent to remove the oxide film, moisture absorption flux residues form an electrolyte constituting the strong corrosive; aluminum, copper atoms diffuse faster, easier plastic Hydraulic adaptersconnector in the package forming fusible eutectic brittle, leading to joint strength is low, and the electrode potential than the electrode potential is high, prone to intergranular corrosion. Thus, aluminum and copper is generally believed that direct brazing is difficult. In order to prevent oxidation of solder joints, preferably in an inert atmosphere, the production of furnace, heating by hydraulic hose fittingresistance heating or flame brazing.
In order to avoid the formation of aluminum and copper brittle compounds, aluminum and copper atoms necessary to avoid direct contact, and to avoid corrosive flux caused by corrosion problems, can be coated on the surface layer of metal (such as nickel), and then with Brazed , to avoid the formation of aluminum and copper brittle compound, but also can be used corrosive or non-corrosive flux, thus increasing the joint strength and corrosion resistance.

Pack plastic hose connector installation and application

Plastic coated metal hose is mainly used for the production, processing cable protection. Because plastic coated metal hydraulic hose assemblys with light weight, good flexibility and strength of the connection accessories, electrical properties and oil, splash water and other features, so often widely used in electric power, chemical industry, metallurgy, light industry, machinery and other industries. hydraulic hose fittings plastic bag purpose is to protect the wire and cable and insulation, waterproof, can increase the cable bend beautiful.Although compressible metal hose can stretch, but if you do not install the correct position, it will soon break, reduce the service life. Hose plastic bag selection, reference should be corrosion hose material machines and corrugated plastic coated metal hose DN, use, the first cable wires through the pipes, matched with the corresponding model DPJ type connector that available.

2013年11月12日星期二

High oil and high-pressure hose

High oil and high-pressure hoseSuch highhydraulic tube fittings , mainly used in construction machinery , the use of high strength , high frequency . Strong corrosion resistance and pressure resistance . We can see a lot of construction vehicles, especially excavators, particularly evident , it is now everywhere, not only that, the excavator head is getting bigger , the job has become increasingly pursuit of high intensity , heavy , frequent trend.

Micro oil-resistant high-pressure hose .

Micro oil-resistant high-pressure hose .
  Such high pressure hose , mainly used in coal mine hydraulic bracket , dosage particularly large, some large mines , the amount to tens of millions a year , and say it is very terrible , there are times , I Inner Mongolia, in a large warehouse to see mine that a lot of hydraulic hose assemblys, looks like a hill heap. In particular, some caliber 152 , and 204 largehydraulic hoses , each root to all kind of scary to see the value of money. That fight was convinced that this market is quite large . Secondly, in terms of performance and practical with low agricultural equipment.

High pressure hose and fittings assembly withhold the amount and mode selection improperly withheld

High pressure hose and fittings assembly and withhold the amount of the withholding way inappropriate choice . Or joint structure, material , size selection is unreasonable, can lead to pressure hose and fittings too tight or too loose , causing early damage joints . Assembly , if the withholding amount is too small , that withhold joints between the weight of too loose with the hose when under the effect of the hydraulic hose assemblys during the initial period there may emerge from the joint ; withheld if excessive , then withhold joints and hose too tight , easily lead to the hose inner layer of localized damage , deformation, cracks , high pressure oil from the weak rupture directly into the layer of wires , and then he went along the gap between the wire coat tail ejected , or along the wires of the layer has been somewhere he went to build up , so that the outer plastic drum kits produced even rupture . Hose and connectors in the assembly, if the withholding too fast, easy to cause damage to the inner rubber layer and wire breakage , so that premature failure of the hose in use . In addition , the joint design is unreasonable , jerry , processing of poor quality, can also cause damage to the inner glue ; if improperly fitting material selection , not reach high pressure hose assembly requirements. Will shorten the life of high pressure hose .

Selection of high-pressure hose assembly

Hose sheathing installed in the main hydraulic hose, wire, cable and other products outside. Its function is reinforced hydraulic hose, wire, cable and other interior products, wear-resistant, antistatic properties, in a variety of harsh environments such as inside of Jic hydraulic fittings hose products play a security role.hydraulic fittings, wire, cable and other product installation screw protective cover not only improve the aesthetics, but also can extend the life of the product inside. Retaining spring with traditional metal products, rubber hose protector easy to install and better wear resistance; anti-aging, corrosion resistance strong; more powerful hydraulic hoses, wires, cables and other products for anti-aging and anti-surface friction protection; has more excellent, more convenient, more environmentally friendly energy-saving effect.