Hydraulic ferrules installation

Hydraulic ferrules card sets is one of the three parts of the card sets of pipe joints (ferrules, nuts, seamless steel pipe) composed. Working principle is the seamless steel pipe inserted into the card kit, ferrule nut using inconsistent card sets, card kit seamless steel blade evenly cut, form an effective seal. Card sets straight pipe fittings are widely used in oil refining, chemical, oil, gas, food, pharmaceutical, and other instruments. Main features: high accuracy, good finish, inside and outside the walls of the heat pipe no oxide layer, the inner wall of cleanliness is good, pipe withstand high pressure, cold deformation, flaring, flattening no cracks, deformation and can hydraulic fitting manufacturers  a variety of complex machining process . Pipe color: light gray with white sleeve type connector installation methods: Saw a suitable length of seamless steel pipe, removing burrs at the port. Perpendicular to the axis of the pipe end, angle tolerance is not greater than Hydraulic  ferrules . If you need to bend the tube, from the end face of the tube to bend parts of the line segment length can not be less than three times the length of the nut. The nut and condoms on the seamless steel tubes. Note the direction of the nut and ferrules, not installed backwards. In the pre-assembled connector body Lubricate threads and put the card, insert the tube fitting body (tube must be inserted in the end) Tighten the nuts by hand. Fittings installation instructions: When installing fittings need to take over the interface with internal and external fittings are connected to handle clean, take over the mouth must be polished smooth surface can not have glitches and uneven surfaces. And take over the site and fittings embedded bending phenomenon should not have, or will cause the connection fittings and steel pipe leakage phenomenon. Pipe fittings at both ends of the connection tube best uniform material, which can effectively prevent leakage.